Xhorse VVDI BIM Highlights and New Features:
1. Add ethernet port,support 10/100M programming via the Ethernet
So it's Greatly speed up the F/G Classis Programming (Being connected via the network cable) and coding
2. OBD key learn: support CAS1/ CAS2/ CAS3/ CAS3+/ CAS3+ISTAP/ CAS4/ CAS4+ version.
3. File make key: support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+, etc.
As for CAS1/CAS2/CAS3/CAS3+ system, support reading EEPROM and synchronous code data.
4. Support FEM/BDC system generating key, replacing FEM/BDC control units, reset mileage.
5. Support CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAS4+ mileage correction.
6. Support DOlP Vehicle/ Module Programming
7. Support BMW E-Sys and Rhelngold Diagnostic System.
Be able to replace the specialized devices. (Being connected via the network cable)
synchronous ELV and CAS.
8. Support getting read ISN data without disassembling the ECU (N13/N20/N55/N63)
9. Support reset 8HP gearbox in F chassis.
10. Support exchange ECU and CAS.
Support BMW ECU Programming(NBT/CIC) (Being connected via the network cable)
11. Works on All Windows computer, like win7, win8, win10.
12.Support WIFI 802.1b/g, 150 Mbps high-speed connection, and WIFI OTA upgrade
Functions of VVDI BIM Tool
1. E-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support scan all car units
3). Support calculate all configuration units
4). Support read/write car configuration(FA)
5). Support input HW/ZB number to programming
6). Support calculate default coding from FA
7). Support edit detail coding information, change car config
8). Support many languages DTC code
2. F-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support read/write car configuration(FA)
3). Support calculate programming files from unit, car, whold database
4). Support calculate default coding from FA
5). Support edit detail coding information, change car config
6). Support detail special function list from coding
7). Support many languages DTC code
3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
1). Support read key information, write key inforamtion
2). Support key learning
3). Support read/write EEPROM
4). Support read ECU/gearbox synchronize codes
5). Support write ECU/gearbox synchronize codes
6). Support synchronize ECU and CAS
7). Support synchronize CAS and ELV
8). Support read ISN via OBDII
9). Support reset KM via OBDII
10). Support disable key/enable key
4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
1). Support read CAS encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support update original CAS4 file
5. FEM/BDC OBD key learning
1). Support read FEM/BDC encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support exchange used FEM/BDC
9). Support close/open transport mode
10). Support reset ECU lock
11). Support switch on ignition without working key
6. CAS EEPROM dump key learning
1). Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
2). Support prepare dealer key via programmer
3). Support disable key/enable key
4). Support read ISN from working key
7. 8HP Gearbox renew
1). Support clear ISN in 8HP gearbox
2). Support backup/restore coding
3). Support reset adaptation information
8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc
9. Read E-Series/F-Series ECU ISN via OBDII
1). Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
2). Support MED17xx/MVD17xx/MEVD17xx/MV1722
3). Support MED172/MEV17N46/ME17N45
4). Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU
10. Support exchange ECU and CAS
1). Support write ECU ISN via OBDII
2). Support write ECU VIN via OBDII
3). Support change ECU ISN and VIN with EEPROM dump
4). Support chagne CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump
11. CAS repair(OBD&EEPROM)
1). Support repair ISTAP CAS
2). Support repair CAS EEPROM(Service mode EEPROM), you can start engine after repair the file(CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)
12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
1). Support CAS3+(1L15Y) encrypt version
2). Support CAS3++(ISTAP) version
3). Support CAS4+(5M48H) version
13. File KM calibration
1). Support EWS1, EWS2, EWS3, EWS4
2). Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
3). Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
4). Support E-Series dashboard EEPROM(M35080)
5). Support F-Series dashboard EEPROM(35160, 35128)
14. Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer
15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG
VVDI BIMTOOL Pro vs VVDI BMW Tool vs VVD2
Package includes:
1. Add ethernet port,support 10/100M programming via the Ethernet
So it's Greatly speed up the F/G Classis Programming (Being connected via the network cable) and coding
2. OBD key learn: support CAS1/ CAS2/ CAS3/ CAS3+/ CAS3+ISTAP/ CAS4/ CAS4+ version.
3. File make key: support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+, etc.
As for CAS1/CAS2/CAS3/CAS3+ system, support reading EEPROM and synchronous code data.
4. Support FEM/BDC system generating key, replacing FEM/BDC control units, reset mileage.
5. Support CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAS4+ mileage correction.
6. Support DOlP Vehicle/ Module Programming
7. Support BMW E-Sys and Rhelngold Diagnostic System.
Be able to replace the specialized devices. (Being connected via the network cable)
synchronous ELV and CAS.
8. Support getting read ISN data without disassembling the ECU (N13/N20/N55/N63)
9. Support reset 8HP gearbox in F chassis.
10. Support exchange ECU and CAS.
Support BMW ECU Programming(NBT/CIC) (Being connected via the network cable)
11. Works on All Windows computer, like win7, win8, win10.
12.Support WIFI 802.1b/g, 150 Mbps high-speed connection, and WIFI OTA upgrade
13. VVDI BIMTool Pro Language: English, Spanish, Italian, Polish, Germany, Hungarian, Chinese
VVDI BIMTOOL Pro Using Notice:
1. Please don't use the Internet Port and USB Port at the same time.
For FEM/BDC Programming using the USB Port connect is ok; Others Programming you can connect the Internet Port.
2. When connect the port with PC, first it will display"Booting", after 20 secs it will display as "BMW", then it means the connect ok.
VVDI BIMTOOL Pro Using Notice:
1. Please don't use the Internet Port and USB Port at the same time.
For FEM/BDC Programming using the USB Port connect is ok; Others Programming you can connect the Internet Port.
2. When connect the port with PC, first it will display"Booting", after 20 secs it will display as "BMW", then it means the connect ok.
Functions of VVDI BIM Tool
1. E-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support scan all car units
3). Support calculate all configuration units
4). Support read/write car configuration(FA)
5). Support input HW/ZB number to programming
6). Support calculate default coding from FA
7). Support edit detail coding information, change car config
8). Support many languages DTC code
2. F-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support read/write car configuration(FA)
3). Support calculate programming files from unit, car, whold database
4). Support calculate default coding from FA
5). Support edit detail coding information, change car config
6). Support detail special function list from coding
7). Support many languages DTC code
3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
1). Support read key information, write key inforamtion
2). Support key learning
3). Support read/write EEPROM
4). Support read ECU/gearbox synchronize codes
5). Support write ECU/gearbox synchronize codes
6). Support synchronize ECU and CAS
7). Support synchronize CAS and ELV
8). Support read ISN via OBDII
9). Support reset KM via OBDII
10). Support disable key/enable key
4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
1). Support read CAS encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support update original CAS4 file
5. FEM/BDC OBD key learning
1). Support read FEM/BDC encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support exchange used FEM/BDC
9). Support close/open transport mode
10). Support reset ECU lock
11). Support switch on ignition without working key
6. CAS EEPROM dump key learning
1). Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
2). Support prepare dealer key via programmer
3). Support disable key/enable key
4). Support read ISN from working key
7. 8HP Gearbox renew
1). Support clear ISN in 8HP gearbox
2). Support backup/restore coding
3). Support reset adaptation information
8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc
9. Read E-Series/F-Series ECU ISN via OBDII
1). Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
2). Support MED17xx/MVD17xx/MEVD17xx/MV1722
3). Support MED172/MEV17N46/ME17N45
4). Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU
10. Support exchange ECU and CAS
1). Support write ECU ISN via OBDII
2). Support write ECU VIN via OBDII
3). Support change ECU ISN and VIN with EEPROM dump
4). Support chagne CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump
11. CAS repair(OBD&EEPROM)
1). Support repair ISTAP CAS
2). Support repair CAS EEPROM(Service mode EEPROM), you can start engine after repair the file(CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)
12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
1). Support CAS3+(1L15Y) encrypt version
2). Support CAS3++(ISTAP) version
3). Support CAS4+(5M48H) version
13. File KM calibration
1). Support EWS1, EWS2, EWS3, EWS4
2). Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
3). Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
4). Support E-Series dashboard EEPROM(M35080)
5). Support F-Series dashboard EEPROM(35160, 35128)
14. Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer
15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG
VVDI BIMTOOL Pro vs VVDI BMW Tool vs VVD2
| Item Name | VVDI BIMTOOLPro | VVDI BMW Tool | VVDI2 |
| Image |  |  | |
| Function | Locksmith, Programming, Coding | Locksmith, Programming, Coding | Locksmith |
| Update | Software Online for free Firmware use "update kit" update for free | Software Online for free Firmware use "update kit" update for free | Software Online for free Firmware use "update kit" update for free |
| Support Programming System | EWS to CAS (1, 2, 3, 3++ 4,4+) and the latest FEM/BDC system | EWS to CAS (1, 2, 3, 3++ 4,4+) and the latest FEM/BDC system | EWS to CAS (1, 2, 3, 3++ 4,4+) |
| Progrogramming Function | EWS to CAS (1, 2, 3, 3++ 4,4+) and the latest FEM/BDC system | Support Can | NO |
Package includes:
1pc x VVDI BIMTool Pro Main Unit
1pc x OBD Cable
1pc x Ethernet Cable
1pc x USB Cable
1pc x ECU Reflash Cable
1pc x Plastic Box
VVDI BIMTOOL Pro Update Log
VVDI BIMTOOL Pro Newly Update on 2021-04-06
*** Require firmware V1.6.4
************************************************************************
===== BMW V1.7.0 =====
1. Bugfix for Read 6HP EGS ISN(E-series)
2. Add many new functions for coding
3. Improvement for F/G series programming and coding
4. Bugfix
1pc x OBD Cable
1pc x Ethernet Cable
1pc x USB Cable
1pc x ECU Reflash Cable
1pc x Plastic Box
VVDI BIMTOOL Pro Update Log
VVDI BIMTOOL Pro Newly Update on 2021-04-06
*** Require firmware V1.6.4
************************************************************************
===== BMW V1.7.0 =====
1. Bugfix for Read 6HP EGS ISN(E-series)
2. Add many new functions for coding
3. Improvement for F/G series programming and coding
4. Bugfix
