Vgate iCar Pro WIFI OBD2 scanner is an auto diagnostic tool OBDII scan tool for iOS and Android devices
Features:
- CLEAR CHECK ENGINE LIGHT - This iCar Pro code reader will help you save money and accurately diagnose check engine light problem. Very easy to use.
- EASY FITMENT - The majority of cars made in the past 2 decades are fitted with an OBD2 diagnostic port, simply find the port and plug the iCar Pro in.
- FIT AND FORGET - It really is possible to fit and forget beacuse it's micro size and unique power saving functionality that protects your battery
- WORKS WITH HUNDREDS OF APPS - The Vgate iCar Pro Bluetooth Low Energy device works with the most popular OBD apps. Please find download instruction for Android device in product description.
- 2 YEAR WARRANTY - We offer a 2 year warranty as standard. If you have any problem with the device simply send it back and we will despatch a brand new replacement the following working day.
Functions:
- Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning. (over 3000 generic code definitions in the database).
- Clear trouble codes and turn off the MIL ("Check Engine" light)
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure
Tips before your purchase:
- For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information
- Label must state that the vehicle is OBD II compliant. To be sure your vehicle complies with OBD-II, look for a sticker on the vehicle
- under the hood in the engine compartment that clearly states “OBD II compliant or certified”.
OBD-II protocols supported:
- SAE J1850 PWM(41.6 Kbaud)
- SAE J1850 VPW(10.4 Kbaud)
- ISO9141-2(5 baud init,10.4 Kbaud)
- ISO14230-4 KWP(5 baud init,10.4 Kbaud)
- ISO14230-4 KWP(fast init,10.4 Kbaud)
- ISO15765-4 CAN(11bit ID,500 Kbaud)
- ISO15765-4 CAN(29bit ID,500 Kbaud)
- ISO15765-4 CAN(11bit ID,250 Kbaud)
- ISO15765-4 CAN(29bit ID,250 Kbaud)
- SAE J1939 CAN(29bit ID,250* Kbaud)
- USER1 CAN(11*bit ID,125* Kbaud)
- USER2 CAN(11*bit ID,50* kbaud)
Vehicle Coverage:
- Works on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles (Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)
How to setup WIFI:
For Android users:
- Home screen
- Go to setting page
- Open Wi-Fi
- Run Torque app
- Go to Torque app OBD II adapter settings
- Choose connection type>Wi-Fi
- Set Wi-Fi preferences in the same page
- IP address is 192.168.0.10
- Port is 35000
- Exit Torque app completely
- Run Torque app
- Connected
For iOS users:
- Home screen
- Go to setting page
- Open Wi-Fi
- Select V-LINK
- Run Accurate app
- Go to Accurate app setting page
- Select Wi-Fi
- Exit app completely
- Run Accurate app again
- Connected
Specification:
- Supply Voltage: 11.5V—15V
- Supply Current: <200Ma
- Standby Current: <30Ma (TONWON Pro =<3Ma)
- Operating Temperature: -40℃--85℃
- Operating Humidity: 5%--95%RH Non-Dewfall
