Cheap Ad-blueOBD2 Emulator For IVECO Trucks
ad-BlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on Trucks, which equipped with EURO 4/5/6 catalytic converter systems,
even with damaged adBlue SCR system.dBlueOBD2 is easy to install.
AdBlue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use adBlue/DEF fuel. You can use this device,
if you are unable to find a station to fuel up your adBlue/DEF tank.
Top 5 Reasons to Get Ad-blueOBD2 Emulator for MAN Trucks:
1. ad-BlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ad-BlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ad-BlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ad-BlueOBD2 does not change any of the settings perMANently. To turn back to the truck's original settings, just unplug ad-BlueOBD2 from OBD2 connector.
Installation and Calibration for IVECO Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (IVECO)
Terminal - 5
Terminal - 15
3. Plug ad-BlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Package including:
1pc x Ad-blueOBD2 Emulator Box Interface
Tags: ad-blueobd2
