- ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of Truck or bus and remove the fuses mentioned.
- ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
- Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
- ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
- ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.
AdblueOBD2 Emulator for IVECO Trucks Description:
adBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install.
adBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install.
Installation and Calibration for IVECO Trucks:
- Pull the Key out from the ignition.
- Remove the following Fuses (IVECO) Terminal - 5 Terminal - 15
- Plug adBlueOBD2 into OBD2 connector
- Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
- If any fault light appears on dashboard, delete via service scanner.
Legal Notice
AdBlue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use adBlue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your adBlue/DEF tank.
Certificates : CE/RoHS
Package including:
- 1pc x adBlueOBD2 Emulator Box Interface
- 1pc x User Manuel English
