M35080V6 EEprom Eraser Programmer

M35080V6 EEPROM ERASER/PROGRAMMER was been used to read, program, erase Incremental Registers\EEPROM.M35080V6 is easy to use windows XP/2000/98 software.

ZOBDII Provide top quality M35080V6 EEprom Eraser Programmer, if you need M35080V6 EEprom Eraser Programmer, or have any questions about M35080V6 EEprom Eraser Programmer, welcome to contact us.

Wholesale Top quality X-PROG Box ECU Programmer, Kess ECU Programmer, SBB Pro2 Key Programmer, Volvo 88890300 Vocom Interface, Cummins INLINE 7 Data Link Adapter

images of M35080V6 EEprom Eraser Programmer

M35080V6 EEPROM Eraser Programmer

Functions:

1. Read,program,erase incremental Registers\EEPROM
2.Erase time to Delivery State for M35080V6 1-10 minutes
3.Supported all clock rates 2.5, 5.0 and 6 MHz IC's
4.Erase time to Delivery State* 1-3 seconds
5.In-circuit/On-board EEPROM programming
6.On-board EEPROM programming for M35080V6
7.Onboard processor ATmega16 allow to Firmware Update to new versions
8.Self-Check capabilities
9.4 adaptors for SO8 device

Additional ItemsYou'll Need To Use This Tool:

1.Host:A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.
2.Power supply:An 12 Volt / 500 MA

Notice:

Delivery State: The first 32 bytes (incremental registers) are set to all "0"s, 16 words at 0000 The EEPROM memory array 0020-3FFF set to all FF. The Status register set to 10

Go to Buy: M35080V6 EEprom Eraser Programmer