KZYEE KS11 Brake Fluid Analyzer Professional Brake Fluid Tester Digital Brake Fluids Analyzer with 5 LED Indicator Calibrated for Truck Car Diagnosis
KZYEE KS11 applies to DOT3, DOT4 and DOT5.1 these three types of brake fluid testing, using the AC pulse testing method, greatly to reduce the polarization phenomenon during the brake fluid testing, the test result is accurate and the measuring speed is fast.
ZOBDII Provide top quality KZYEE KS11 Brake Fluid Analyzer Professional Brake Fluid Tester Digital Brake Fluids Analyzer with 5 LED Indicator Calibrated for Truck Car Diagnosis, if you need KZYEE KS11 Brake Fluid Analyzer Professional Brake Fluid Tester Digital Brake Fluids Analyzer with 5 LED Indicator Calibrated for Truck Car Diagnosis, or have any questions about KZYEE KS11 Brake Fluid Analyzer Professional Brake Fluid Tester Digital Brake Fluids Analyzer with 5 LED Indicator Calibrated for Truck Car Diagnosis, welcome to contact us.
Wholesale Top quality X-PROG Box ECU Programmer, Kess ECU Programmer, SBB Pro2 Key Programmer, Volvo 88890300 Vocom Interface, Cummins INLINE 7 Data Link Adapter
images of KZYEE KS11 Brake Fluid Analyzer Professional Brake Fluid Tester Digital Brake Fluids Analyzer with 5 LED Indicator Calibrated for Truck Car Diagnosis
The Automobile Brake Fluid ( Hereinafter referred to as brake fluid )is a kind of liquid that used to transfer pressure to stop the rotation of wheels in the hydraulic braking system. Its quality,selection and using correctly or not will relate to the driving safety directly.
The Brake Fluid Analyzer which developed and produced by our company can test the brake fluid quality quickly and accurately, check the humidity to indicate you the brake fluid state, and providing you with reliable basis for the maintenance and replacement.
Different types of brake fluid will vary according to the different boiling point of the water contained, the brake fluid should be replaced timely when its water content is over standard, to ensure your driving safety
- This product is specially designed for measuring brake fluid"DOT3", "DOT4" and "DOT5.1"
- Probe waterproof design
- Power supply:7th(AAA)Battery （Without Battery Please purchase locally）
- Working Voltage: 2.0V~3.5V
- Working current: 40mA, Shut off current less than 5uA
- Support low power alarm and low power automatically shut off, protect Rechargeable battery.
- Auto Power Shut Off: No operation Auto Power Shut Off 1 Minute later
- Operating Temperature:-0-40 degree
- Storage Temperature:-20-60 degree
KZYEE KS11 Brake Fluid Analyzer Features：
- Green LED (＜1%) ON: The brake fluid performance is excellent
- Yellow LED(＞1.5%) ON: The brake fluid performance is fine
- Yellow LED(＞2.5%) ON: The brake fluid performance is OK, but it need to be detected and observed in the near future
- Red LED(＞3%) ON: The brake fluid performance is poor, it need to be replaced
- Red LED(＞4%) ON: The brake fluid performance is extremely poor, it need to be replaced immediately !
- This product support Ni-MH recharging batteries.
- After finishing testing,please clean the probe in case the Retention of stains will affect usage next time.
- If Unused for long periods, it is recommended to remove the battery, put the product stored at room temperature and dry place.
- 1pc x KZYEE KS11 Brake Fluid Analyzer
- 1pc x User Manual