AdblueOBD2 Emulator For DAF Trucks Plug And Drive Ready Device By OBD2
ADBlue/DEF and NOx Emulator via OBD2,
1.operation very convenient.Plug and Drive Ready Device!
2.Especially for DAF Trucks
3.override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
ZOBDII Provide top quality AdblueOBD2 Emulator For DAF Trucks Plug And Drive Ready Device By OBD2, if you need AdblueOBD2 Emulator For DAF Trucks Plug And Drive Ready Device By OBD2, or have any questions about AdblueOBD2 Emulator For DAF Trucks Plug And Drive Ready Device By OBD2, welcome to contact us.
Wholesale Top quality X-PROG Box ECU Programmer, Kess ECU Programmer, SBB Pro2 Key Programmer, Volvo 88890300 Vocom Interface, Cummins INLINE 7 Data Link Adapter
images of AdblueOBD2 Emulator For DAF Trucks Plug And Drive Ready Device By OBD2
- ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of Truck or bus and remove the fuses mentioned.
- ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
- Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
- ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
- ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.
- Pull the Key out from the ignition.
- Remove the following Fuses (DAF) 6 - 15A E357 - 20A
- Plug adBlueOBD2 into OBD2 connector
- Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
- If any fault light appears on dashboard, delete via service scanner.
- 1pc x adBlueOBD2 Emulator Box Interface
- 1pc x User Manuel English
Go to Buy: AdblueOBD2 Emulator For DAF Trucks Plug And Drive Ready Device By OBD2