Adblue OBD2 Emulator For DAF Trucks Verride AD-Blue System Instantly
1.AdBlue OBD2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
2.Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
3.AdBlue OBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
ZOBDII Provide top quality Adblue OBD2 Emulator For DAF Trucks Verride AD-Blue System Instantly, if you need Adblue OBD2 Emulator For DAF Trucks Verride AD-Blue System Instantly, or have any questions about Adblue OBD2 Emulator For DAF Trucks Verride AD-Blue System Instantly, welcome to contact us.
Wholesale Top quality X-PROG Box ECU Programmer, Kess ECU Programmer, SBB Pro2 Key Programmer, Volvo 88890300 Vocom Interface, Cummins INLINE 7 Data Link Adapter
images of Adblue OBD2 Emulator For DAF Trucks Verride AD-Blue System Instantly
AdBlue OBD2 Emulator for DAF Description:
AdBlue OBD2 is a Plug & Drive Ready device to mulate working ad-Blue systems and NOx sensors on Trucks, which equipped with EURO 4/5/6 catalytic converter systems,
even with damaged ad-Blue SCR system. dBlueOBD2 is easy to install.
AdBlue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use ad-Blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.
Top 5 Reasons to Get Ad-blue OBD2:
1. AdBlue OBD2 is very easy to install. Just Plug it into OBD2 connector of Truck or bus and remove the fuses mentioned.
2. AdBlue OBD2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. AdBlue OBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. AdBlue OBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug AdBlue OBD2 from OBD2 connector.
Installation and Calibration for DAF Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (DAF)
6 - 15A
E357 - 20A
3. Plug AdBlue OBD2 into OBD2 connector
4. Turn on the ignition and check the level of ad-Blue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Package including:
1pc x AdBlue OBD2 Emulator Box Interface
Go to Buy: Adblue OBD2 Emulator For DAF Trucks Verride AD-Blue System Instantly